JD 4600
lantat
Join Date: Sep 2009 Posts: 5 Paris,KY |
2009-09-16 165705
I can not get my 4600 to start now. Last week it started and running fine and after stopping from bushhogging for a minute it would start but when push the pedal it would die out. Today just cranks ,not start.Changed fuel filter(pretty bad)checked all fuel line not clogged.What else do I need to do. Please advise.
Reply to | Quote Reply | Add Photo
JD 4600
hardwood
Join Date: Dec 2002 Posts: 3583 iowa |
2009-09-16 165707
Check your owners manual. Some 4XXX models have self priming injector pumps, some dont. You may need to bleed the system, it will tell you how. Frank. ....
Reply to | Quote Reply | Add Photo
JD 4600
lantat
Join Date: Sep 2009 Posts: 5 Paris,KY |
2009-09-21 165842
It started this weekend but when you push the forward or reverse pedal it dies out. Took it a few times to start it back up. Any ideas what causing it to die out when pushing pedals? ....
Reply to | Quote Reply | Add Photo
JD 4600
hardwood
Join Date: Dec 2002 Posts: 3583 iowa |
2009-09-22 165847
Remiove the fuel line from the inlet side if the fuel filter, if the fuel level in the tank is above the filter inlet you should have flow, if not something is plugged.
If you have checked this and changed the filter there may be a hand primer pump to bleed the injector lines, your owners manual will tell you how.
If all the above fail and you aren't an experienced diesel repair person I'd call the dealer for their help. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This